HA-695 is a high temperature of hotmelt type epoxy resin systems, after curing the Tg will be up to 180 ℃ still retains excellent toughness, withstand high impact strength and exhibit excellent mechanical properties. It is very suitable for using in high-end products.

*IEC 1006 ,DSC,10k/min

HP-8100 is a specially modified resin system with high mechanical strength and toughness. The material display excellent performance in fatigue resistance and impact strength. HP-8100 is an outstanding resin selection for advanced composites. 

*IEC 1006,DSC,10k/min

SP-2022 is a specially modified resin system with high mechanical strength and toughness. The material display excellent performance in fatigue and impact. SP-2022 is an outstanding resin selection for advanced composites. 

*IEC 1006 ,DSC,10k/min

FA-695 is a high temperature of solvent type epoxy resin systems, after curing the Tg will be up to 180 ℃ still retains excellent toughness, withstand high impact strength and exhibit excellent mechanical properties. It is very suitable for using in high-end products.                                          

*IEC 1006 ,DSC,10k/min

FW-003ABC is specially formulated anhydride curing epoxy formulation for filament winding impregnating. It has low viscosity and good impregnating ability. The excellent mechanical strength is suitable for most applications

Typical Application

LPG tank

Industrial pipe.

Golf shaft

*IEC 1006,DSC,10k/min

FW-005 is specially formulated amine curing epoxy formulation for filament winding impregnating. It has low viscosity and good impregnating ability. The excellent mechanical strength is suitable for most applications

Typical Application

LPG tank

Industrial pipe.

Golf shaft

*IEC 1006 ,DSC,10k/min

HL-001AB  is a high-performance epoxy resin system.It can impregnated with the fibers, such as woven carbon fibers, glass fibers, Kevlar, cotton cloth .It can be molded and cured at room temperature molding.It also have high strength, less bubbles, yellowing resistance and other characteristics.

*IEC 1006,DSC,10k/min

HL-208AB 是一高性能之環氧樹脂系統，可與纖維編織佈如碳纖維,玻璃纖維,Kevlar,棉布等含浸,並且於常溫模壓固化成型。具有高強度、氣泡少​​、耐黃變等特性。

*IEC 1006 ,DSC,10k/min

RM-001 is specially formulated amine curing epoxy formulation for RTM process and vacuum bag process. It has low viscosity and good impregnating ability. The excellent mechanical strength is suitable for most applications, especially for wind turbine blade.

Typical Application

Wind turbine blade

Boat

Helmet

*IEC 1006 ,DSC,10k/min

RM-003 is specially formulated amine curing epoxy formulation for RTM process and vacuum bag process. It has low viscosity and good impregnating ability. The excellent mechanical strength is suitable for most applications, especially for wind turbine blade.

Typical Application

Wind turbine blade

Boat

Helmet

*IEC 1006 ,DSC,10k/min